Maytag washer has no power

When your Maytag washer has no power, it can bring your laundry routine to a sudden halt. Whether the machine fails to turn on or doesn’t respond to any inputs, the problem can stem from various sources, including electrical issues, damaged components, or simple user errors. The good news? Many of these issues can be resolved with basic troubleshooting steps. Identify the root cause and get practical solutions to restore power to your Maytag washer.

Key reasons for the problem:

40% of reported issues are the

Power Cord

35% of reported issues are the

User Control and Display Board

20% of reported issues are the

Door Lock Assembly

5% of reported issues are the

All Other Causes

Diagnostic and troubleshooting steps

Is your Maytag washer not powering on? This step-by-step guide covers everything from power cords to control boards, offering practical solutions and when to seek professional help.

Step 1:

Check the Power Supply

Ensure the washer is securely plugged into a working outlet. Test the outlet with another device to confirm it’s functional.
Avoid using extension cords, as they can cause power interruptions.

Step 2:

Inspect the Circuit Breaker

Locate your home’s breaker box and check if the circuit for the washer has tripped. If it has, reset the breaker and try powering on the washer again.

Step 3:

Examine the Power Cord

Inspect the washer’s power cord for signs of wear or damage, like fraying or exposed wires. Replace the cord if it’s compromised.

Step 4:

Test the Lid or Door Switch

For top-loading washers, ensure the lid is fully closed and the lid switch is functioning properly. Use a multimeter to test for continuity.
On front-loading models, check that the door is securely closed, and inspect the door switch for faults.

Step 5:

Check the Thermal Fuse

If the washer shows no signs of life, the thermal fuse may have blown. Access the fuse inside the washer, test it with a multimeter, and replace it if needed.

Step 6:

Inspect the Control Board

A failed control board can prevent the washer from turning on. Look for visible signs of damage, like burn marks or loose connections.
Replace the control board if necessary.

Step 7:

Examine Internal Wiring

Loose or damaged wiring within the washer can disrupt power flow. Inspect all connections and secure or replace any damaged wires.

Step 8:

Perform a Hard Reset

Unplug the washer for 5–10 minutes to reset its internal electronics. Plug it back in and attempt to power it on again.

Step 9:

Consult the User Manual

Review your washer’s manual for model-specific troubleshooting tips and error codes that could point to the underlying problem.

Key actions for homeowners:

Check the cord for damage and ensure it’s not being pinched or bent excessively.
Moisture buildup can lead to electrical problems. Wipe down the washer regularly and ensure it’s in a well-ventilated area.
Plug your washer into a dedicated outlet to prevent circuit overloads that could trip the breaker.
Ensure the lid or door is fully closed during operation to avoid damaging the switches.
Have your washer inspected annually by a professional to catch potential issues before they become major problems.

Most common repairs needed to fix a maytag washer

When your washer has no power, certain repairs are more commonly required than others. Below are the most frequent fixes:

Check and Reset the Circuit Breaker: If the circuit breaker for the washer has tripped, resetting it is an easy fix. If it frequently trips, further investigation may be needed.
Inspect the Washer’s Outlet: A faulty outlet may not supply enough power. Testing and possibly replacing the outlet can restore functionality.
Address Power Supply Issues: For washers connected to a dedicated circuit, issues with the home’s power supply or electrical grid can cause a lack of power. Professional help may be required.

Frequently Asked Questions

Why does my Maytag washer have no power even though it’s plugged in?
If your washer is plugged in but still not powering on, the issue could be a tripped circuit breaker, a faulty outlet, or a damaged power cord. Check these components first before moving on to more complex troubleshooting.
How do I reset my Maytag washer?
Unplug your washer from the power outlet and wait for 5–10 minutes. Plug it back in and try powering it on again. This hard reset can resolve minor electronic glitches.
What should I do if my Maytag washer’s control board is faulty?
If the control board is damaged or malfunctioning, it may need to be replaced. Contact a professional technician to assess and replace the control board if necessary.
Can I repair a blown thermal fuse myself?
Yes, but only if you’re comfortable working with electrical components. Ensure the washer is unplugged, locate the thermal fuse, and test it with a multimeter. Replace the fuse if it’s blown.

Want to view more?

The Most Consumer Centric
Home Warranty Provider.

Homeowners across the country recommend Liberty Home Guard Home Warranty above all others.
Don’t just take our word for it—Liberty Home Guard Reviews speak for themselves!

We love working with liberty home gu...

We love working with liberty home guard. We are always able to get in touch with a live person and payments are always made in a t...

Sentinel Plumbing LLC

They will try to help you the best t...

They will try to help you the best they can. Fair price and excellent service , Adam helped me with all my questions and had solut...

Mario L

I want to extend my sincere apprecia...

I want to extend my sincere appreciation to Annie Núñez for her remarkable performance in Dispatch at Liberty Home Guard. Her de...

Michel Ramirez

I've had the pleasure of working wit...

I've had the pleasure of working with Ronald at Liberty Home Guard as my account manager, and I couldn't be more impressed. Ronald...

Emily F

Helpful and reliable service!!

Stephanie K

I’m leaving a review of my experie...

I’m leaving a review of my experience signing up with liberty home guard. My sales person was Freddy, he was friendly and flexib...

Lawton J

Very helpful.

Lori G

I have made three claims with Libert...

I have made three claims with Liberty and all have gone well; I always expect it to be a pain because most insurance is, but Liber...

Janna C

I want to thank the team at Liberty ...

I want to thank the team at Liberty Home Guard and especially John Vasquez, for the exceptional and professional work they do when...

Michel R

I called in to file a claim, and Ros...

I called in to file a claim, and Rose from the claims department was wonderful. I'm greatly appreciative of her patience and compa...

Lesly P